How to set up the Jobe Infinity Island

Our Infinity Island is modular so you can extend your yacht until infinity. Create a unique playground for the family: ideal for sunbathing, doing yoga, playing around, or docking your jet ski or stand-up paddleboard.

How to set up the Jobe Infinity Island

Here you can find step-by-step how to set up the Jobe Infinity Island:
  • Unroll the Island on the platform of your boat.
  • Place the corner of the Island where the valve is located on the platform of your boat.
  • Connect the rope to the D-rings next to the valve, so you can attach the Island with the two corners to the boat.
  • Open the valve
  • Inflate the Infinity Island with the battery-powered pump to the recommended pressure of 6 psi.
  • When the Island is fully inflated, the pump will automatically shut off.
  • Disconnect the pump and close the valve.
  • Place the Infinity Island in the water. The small rings should be closest to the platform of your boat.
  • Inflate the Transom Bumpers and strap them down tightly next to the platform of your boat. Always use two Transom Bumpers to be safe!
  • Open the lock mount and mount the ladder.
  • Close the lock mount and it’s secured.
  • Place the straps onto the ladder. Adjust the straps if needed.

Now you are ready to have fun on the water!

Leave a comment

Please note: comments must be approved before they are published.